Anti-detachment fittings - List of Manufacturers, Suppliers, Companies and Products

Anti-detachment fittings Product List

1～3 item / All 3 items

Displayed results
Significantly reduce the risk of disconnection! "Naked Stop-kun"

Significantly reduce the risk of disconnection! "Naked Stop-kun"

Improved corrosion resistance: New release of hot-dip galvanized products! Disconnect prevention fittings for Atoms coupling.

Significantly reduce the risk of disconnection! We mitigate the risk of piping coming loose from the Atom's coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Solid support with joint fittings and angle pieces that have a thickness of 6mm (Note 1). ■ High-strength bolts with a strength classification of 10.9 (Note 2) are used for the joint fitting bolts, allowing for tightening at high torque values. Note 1: For sizes 20A to 32A, the thickness is 4.5mm. Note 2: Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mechanical joint disengagement prevention fitting "Kamik 90"

Mechanical joint disengagement prevention fitting "Kamik 90"

The horse and push bolt are made of corrosion-resistant alloy! They demonstrate a disengagement prevention performance of 3DkN or more!

"Kamik 90" is a disengagement prevention fitting for mechanical joints handled by Kurodaito. It exhibits a disengagement prevention performance of A grade, as defined in the technical standards (draft) for seismic joints of underground buried pipelines by the National Institute for Land and Infrastructure Management, with a performance of 3DkN or more. (D: nominal diameter) The contact ratio of the claw part of the fitting is over 90% with the outer circumference of ductile cast iron pipes, and it makes a soft touch with the ductile cast iron pipes, further reducing the impact on the mortar lining of the inner surface compared to conventional products (Kamik 80). The fitting and the pressing bolt are spherical, accommodating not only disengagement but also entry. [Features] ■ Exhibits disengagement prevention performance of 3DkN or more ■ Contact ratio of the fitting is over 90% ■ The fitting and pressing bolt are spherical, accommodating both disengagement and entry ■ The fitting and pressing bolt are made of corrosion-resistant alloy *For more details, please refer to the PDF document or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
The galvanized version of the pipe disconnection prevention fitting "Nuke Dome-kun" is now available!

The galvanized version of the pipe disconnection prevention fitting "Nuke Dome-kun" is now available!

Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.

Significantly reduce the risk of disconnection! We mitigate the risk of piping coming loose from the Atoms coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Strongly supported by joint fittings with a thickness of 6mm (*1) and angle pieces. ■ The joint fitting bolts use high-strength bolts with a strength classification of 10.9 (*2), allowing for tightening at high torque values. *1. For sizes 20A to 32A, the thickness is 4.5mm. *2. Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.

  • Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.